排序方式： 共有42条查询结果，搜索用时 15 毫秒
11.
N. Satyavani Kalachand Sain Malcolm Lall B. J. P. Kumar 《Marine Geophysical Researches》2008,29(3):167-175
Seismic data from the Andaman offshore region has been examined to investigate for the presence of gas hydrates. The seismic
data displays reflection characteristics such as blanking, enhanced reflection patterns, shadows in instantaneous frequency,
and increase in amplitude with the offset, which are indicative of gas hydrates and underlying free gas. A prominent bottom-simulating
reflection, BSR, coupled with reverse polarity is observed around 650–700 ms. Seismic attributes such as the reflection strength
and instantaneous frequency are computed along this reflector in order to probe for the presence of gas hydrates or free gas
in this region. The reflection plot shows a strong reflector paralleling the seafloor. In addition, attenuation of the high
frequency signal is noticed, indicating the presence of free gas below the BSR. 相似文献
12.
The necessary condition for the seismic refraction method to succeed is that the refracted first arrivals from each layer in a multilayered earth system should be detected on a seismogram as first arrivals, and this is possible only when velocities of all underlying layers are successively greater. The usual procedure to interpret the refraction travel times is to fit such a data set with several intersecting straight lines by employing a visual technique which may lead to errors of subjective judgment, as the velocity model depends on the selection of various line segments through the data. To remove the visual fit we propose here a layer stripping method based on minimum intercept time, apparent velocity, rms residual, and maximum data points by least-squares fitting to yield several intersecting straight lines. Once data are segmented out, the conventional equations can be used to determine the velocity structure. 相似文献
13.
14.
15.
16.
The existence of gas-hydrates in marine sediments increases the seismic velocity, whereas even a small amount of underlying
free-gas reduces the velocity considerably. The change in velocities against the background (without gas-hydrates and free-gas)
velocity can be used for identification and assessment of gas-hydrates. Traveltime inversion of identifiable reflections from
large offset multi channel seismic (MCS) experiment is an effective method to derive the 2-D velocity structure in an area.
We apply this method along a seismic line in the Kerala-Konkan (KK) offshore basin for delineating the gas-hydrates and free-gas
bearing sediments across a bottom simulating reflector (BSR). The result reveals a four layer 2-D shallow velocity model with
the topmost sedimentary layer having velocity of 1,680–1,740 m/s and thickness of 140–190 m. The velocity of the second layer
of uniform thickness (110 m) varies from 1,890 to 1,950 m/s. The third layer, exhibiting higher velocity of 2,100–2,180 m/s,
is interpreted as the gas-hydrates bearing sediment, the thickness of which is estimated as 100 to 150 m. The underlying sedimentary
layer shows a reduction in seismic velocity between 1,620 to 1,720 m/s. This low-velocity layer with 160–200 m thickness may
be due to the presence of free-gas below the gas-hydrates layer. 相似文献
17.
天然气水合物稳定带下方游离气分布模式、气体含量及其对水合物富集成藏的指示是水合物研究中的难点,而利用振幅随偏移距变化(Amplitude Versus Offset,AVO)与岩石物理模型能够对游离气含量进行地震定量解释.我们对印度Krishna-Godavari(K-G)盆地的地震资料进行了叠前保幅处理,在测井数据和层位标定的基础上,基于等效介质岩石物理模型和AVO正演模拟定量估算了NGHP01-10A井的游离气饱和度,发现水合物下方的游离气饱和度与其分布模式有关.游离气呈均匀分布时饱和度为孔隙空间的0.3%~0.4%,而块状分布时为3%~4%,该结果与NGHP01-10D实测计算的泊松比交汇分析结果吻合很好.最后再根据干燥岩石骨架的泊松比反演结果进一步判断游离气分布为均匀分布,其饱和度为0.3%~0.4%. 相似文献
18.
Stephan R. Sain Reinhard Furrer 《Stochastic Environmental Research and Risk Assessment (SERRA)》2010,24(6):821-829
In climate science, collections of climate model output, usually referred to as ensembles, are commonly used devices to study uncertainty in climate model experiments. The ensemble members may reflect variation in initial conditions, different physics implementations, or even entirely different climate models. However, there is a need to deliver a unified product based on the ensemble members that reflects the information contained in whole of the ensemble. We propose a technique for creating linear combinations of ensemble members where the weights are constructed from estimates of variation and correlation both within and between ensemble members. At the heart of this approach is a Bayesian hierarchical model that allows for estimation of the correlation between ensemble members as well as the study of the impact of uncertainty in the parameter estimates of the hierarchical model on the weights. The approach is demonstrated on an ensemble of regional climate model (RCM) output. 相似文献
19.
Estimating the amount of gas-hydrate and free-gas is difficult in deep seas even with scientific coring and downhole measurements. Well data may be incompatible between holes of a site as well as with depth in the same hole. In this paper, we demonstrate an approach to estimate saturation of gas-hydrate from seismic velocities at any site where data set is limited. The study is carried out in the outer Blake Ridge, which is one of the most intensively studied regions of natural gas-hydrate occurrences and a very distinctive example of studying geophysical signatures of gas-hydrate and free-gas in deep marine sediments. Although, downhole measurements from both vertical seismic profiles (VSPs) and sonic logs provide the most accurate and direct measurements of velocity, only VSP velocities at Ocean Drilling Program (ODP) Sites 994, 995, and 997 on the Blake Ridge are used to estimate the saturation of gas-hydrate and free-gas as sonic logs at ODP sites are not reliable. Here we derive a general trend of the background velocity with depth using the porosity and mineralogy from coring at discrete depth intervals. Saturations of gas-hydrate and free-gas are then estimated from this background velocity using the effective medium modeling. The porosity and mineralogical compositions are taken from four different depths at Site 995, as data quality is the best in this hole. Average saturations of gas-hydrate and free-gas at three holes are estimated as 10–14 and 2–3%, respectively. 相似文献
20.
Radon filters are often used for removal of multiple reflections from normal move-out-corrected seismic reflection data. In the conventional Radon transform, integration surfaces are hyperbolic rather than linear. This specific hyperbolic surface is equivalent to a parabola in terms of computational expense, but more accurately distinguishes multiples from primary reflections. The forward transform separates seismic arrivals by their differences in travel time move-out. Multiples can be suppressed by an inverse transform of the seismic data. Examples show that multiples are effectively attenuated in pre-stack and stacked seismograms. Based on the parabolic Radon transform, a new method is utilized for missing offset restoration, resampling and regularization of pre-stack individual common depth point (CDP) gathers. The method is also valid for resampling spatially aliased seismic data. Restoration of missing offsets and trace interpolation is an interesting and important problem in seismic data processing. Here we present an application of Radon transform on a multichannel seismic data set from the western continental margin of India (WCMI), which shows remarkable signal enhancement. 相似文献